YSTOOL Manual Brake Clutch Fluid Bleeder Kit Oil Change Bleeding Tool Set with 3L Hand Pressure Pump Refill Tank 1L Extractor Bottle Master Cylinder Adapter Caps Compatible with Ford Chevy VW Audi
Greatest Product YSTOOL Manual Brake Clutch Fluid Bleeder Kit Oil Change Bleeding Tool Set with 3L Hand Pressure Pump Refill Tank 1L Extractor Bottle Master Cylinder Adapter Caps Compatible with Ford Chevy VW Audi A quick review
So you can check out the other reviews at Amazon.com
only with $ 53.89
- If there is air in brake system, brake fluid will get damp and spoiled. The wheel brake cylinder will be difficult to return and it may cause brake failure. So brake fluid needs to be timely checked and replaced to ensure its good braking performance. Manual brake fluid bleeder tool pumps the new brake oil into the brake master cylinder while driving air and old fluid out of the system without producing any air. Quick and efficient. Well-maintained brake system brings driving safety
- Hand pressure pump bleeder tools come with 2PCS master cylinder threaded adapter caps with inner diameter 45MM, are compatible with most Alfa Romeo, Audi, Bentley, BMW, Fiat, Land Rover, Lamborghini, Mercedes, Mini Cooper, Porsche, Renault, Volvo, Volkswagen, Bugatti, Chevy, Chrysler, Ford, Toyota. This brake clutch bleeding tool also fits for ABS system. If you have other related equipments or tools, just use them to fill other fluids. Please refer to the auto repair manual and car condition
- Most cars need 2L brake fluid at best for oil replacement, our tank reservoir can hold 3L to complete the work once for all. No need to notice the remaining amount of oil pot. Only 10-15psi is required during the fluid transfer (MAX W.P.: 2 bar / 30 PSI). Refer to car instruction for preparation, add right amount of brake fluid into refill reservoir and connect it to master cylinder, assemble waste oil bottle set and connect it to the wheel cylinder, then pump. Repeat on all wheel cylinders.
- Brake fluid change tool set includes a 3L refueling pot with hand pump & air release valve & pressure gauge & 40-1/4" long hose, a 9-3/4" bleeder tube with black cone nipple, a 1L waste oil bottle, a chain, a handle tool, and two master cylinder adapter caps (straight and elbow type, I.D. 45mm. Make sure your master cylinder cap is a I.D. 45mm threaded cover before purchasing). Tools are mainly made from rigid metal, rubber and plastic material, wearproof and anticorrosive for longer lifespan
- Upon receipt of the product, please first pump the water for performance test. Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for free. Please contact us to resolve any issues during your use before leaving any feedback.
Product Description
Wide Fitment
45MM I.D. master cylinder adapter caps, compatible with most Alfa Romeo, Audi, Bentley, BMW, Fiat, Land Rover, Lamborghini, Mercedes, Mini Cooper, Porsche, Renault, Volvo, Volkswagen, Bugatti, Chevy, Chrysler, Ford, Toyota
 |
 |
 |
|---|---|---|
Manual Brake Bleeder
| Waste Oil Collection System
| 2PCS Master Cylinder Caps and Handle Tool
|
Easy to Use
Operating Instruction
- 1.Make sure no pressure remains inside the unit. Pressure can be released from the release valve on the side of the pump.
- 2.Remove the cap on top of the unit and fill the unit with new brake fluid. Make sure there is no remaining old fluid or debris in the tank.
Filling Procedure
- 1.Select a suitable adaptor from the selection provided with the unit. Installl the adaptor to the master cylinder of the brake system
- 2.Open the brake bleeder screw and connect it to the waste oil bottle with accessories all installed. Pour new brake fluid into the refill tank reservoir, then pump the handle to transfer new fluid and at the same time old fluid will enter into waste oil bottle. (Grease the bleeder screw for seal if there are too much bubbles in the hose) When you see the old fluid become clean in the waste oil bottle, disconnect the nipple. Repeat the process on all 4 wheels. Attention: Brake fluid should be added to a proper liquid level. Too much or too little is bad for brake system maintenance.
- 3.When the brake fluid is flowing, ask a helper to pump the brake pedal while you watch the fluid run through the translucent tube.
- 4.Once the process is complete, release the pressure by pressig down the release valve by the side of the pump. After releasing, disconnect the fluid supply hose from the adapter on the master cylinder. Note: Do not disconnect the adaptor before releasing the pressure.
- 5.Replace the master cylinder cap on the vehicle
- 6.Dispose the waste brake fluid in the bleeding container safely.
Note
- 1.Wear protective goggles and masks to avoid skin contact. After use, clean it for future use.
- 2.Brake fluid is flammable so work place must be kept away from sources of ignition, including hot surfaces e.g. exhaust manifold
- 3.Only new brake fluid can be used, used brake fluid or other fluids will contaminate the system and may cause brake system failure
- 4.Please operate by or under the guidance of professionals
 |  |  |  |  | |
|---|---|---|---|---|---|
| YSTOOL Brake and Clutch Fluid Pneumatic Vacuum Bleeder Tool Kit | YSTOOL Brake and Clutch Fluid Pneumatic Vacuum Bleeder Bleeding Tool Kit | YSTOOL Brake and Clutch Fluid Hand Pump Vacuum Bleeder Tool Kit | YSTOOL Brake and Clutch Fluid Hand Pump Vacuum Bleeder Tool Kit | YSTOOL Hand Held Vacuum and Pressure Pump Brake Clutch Fluid Bleeder Tool Kit |
 |  |  |  |  | |
|---|---|---|---|---|---|
| YSTOOL Manual Brake Clutch Fluid Bleeder Kit | YSTOOL Brake Bleeder Kit Pneumatic Pressure Brake Clutch Fluid Bleeding Tool Set | YSTOOL Brake Bleeder Kit Pneumatic Pressure Brake Clutch Fluid Bleeding Tool Set | YSTOOL 7.5L Manual Automatic Transmission Fluid Refill Pump Set | YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit |
Receive The Special Price Here : ☞☞
----------------------------
Hey my bro, Many thanks for visiting our Website. Are you currently trying to find facts about YSTOOL Manual Brake Clutch Fluid Bleeder Kit Oil Change Bleeding Tool Set with 3L Hand Pressure Pump Refill Tank 1L Extractor Bottle Master Cylinder Adapter Caps Compatible with Ford Chevy VW AudiThe Good News, Right now we're giving big as much as 85% for people who buy YSTOOL Manual Brake Clutch Fluid Bleeder Kit Oil Change Bleeding Tool Set with 3L Hand Pressure Pump Refill Tank 1L Extractor Bottle Master Cylinder Adapter Caps Compatible with Ford Chevy VW Audi products through this Website.Not just that, you'll even get yourself a absolutely free discount in the event that you order today.Thanks for watching and please give a thumbs up.
----------------------------Disclaimer:
This Website is participant in the amazon services llc associate program.I do use affiliate links when linking products in the Website description.This does not affect your buying experience or item price but does mean I receive a small commission on items purchased using such links.An affiliate advertising program designed to provide a means for sites to earn advertising fees by linking to website and amazon.comWe also participates in affiliate programs with other sites. We are compensated for referring traffic and business to other companies.
---------------------------
0 Response to "YSTOOL Manual Brake Clutch Fluid Bleeder Kit Oil Change Bleeding Tool Set with 3L Hand Pressure Pump Refill Tank 1L Extractor Bottle Master Cylinder Adapter Caps Compatible with Ford Chevy VW Audi"
Post a Comment